新聞資訊
網站首頁 > 新聞資訊 >

浙大中控電源中控室的一般操作原則?

2020-10-23 15:03:14 來源:http://www.qistar-garment.net/ 53

中控室操作的一般原則:
General operation principles of central control room:
新型幹法窯係統操作的一般原則,就是根據工廠外部條件變化,適時調整各工藝係統參數,大限度地保持係統“均衡穩定”的運轉,不斷提高設備運轉率。
The general operation principle of the new dry process kiln system is to timely adjust the parameters of each process system according to the changes of the external conditions of the plant, so as to keep the "balanced and stable" operation of the system to a large extent, and continuously improve the operation rate of the equipment.
“均衡穩定”是事物發展過程中的一個相對靜止狀態,它是有條件和暫時的。在實際生產過程中,由於各種主、客觀因素的變化幹擾,難免打破原存的平衡穩定狀態,這都需要操作人員予以適當調整,恢複或達到新條件下的新的均衡穩定狀態,因此運用各種調節手段來保持或恢複生產的均衡穩定,是控製室操作員的主要任務。
"Equilibrium and stability" is a relatively static state in the development process of things, which is conditional and temporary. In the actual production process, due to the changes and interference of various subjective and objective factors, it is inevitable to break the original equilibrium and stable state, which requires the operator to make appropriate adjustment to restore or reach the new equilibrium and stable state under new conditions. Therefore, it is the main task of the control room operator to use various adjustment means to maintain or restore the production equilibrium and stability.
                浙大中控電源
就全廠生產而言,應以保證燒成係統均衡穩定生產為中心,調整其它子項係統的操作。就燒成係統本身,應是以保持優化的合理煆燒製度為主,力求較充分地發揮窯的煆燒能力,根據原燃料條件及設備狀況適時調整各項參數,在保證熟料質量的前提下,大限度地提高窯的運轉率。
As far as the production of the whole plant is concerned, the operation of other sub item systems should be adjusted to ensure the balanced and stable production of the sintering system. In terms of the sintering system itself, it is necessary to maintain an optimized and reasonable calcination system, strive to give full play to the calcination capacity of the kiln, adjust various parameters timely according to the conditions of raw materials, fuels and equipment, and greatly improve the operation rate of the kiln on the premise of ensuring the quality of clinker.
在燒成中控室的具體操作中堅持“抓兩頭,保重點,求穩定,創全優”這12字訣。所謂“抓兩頭”,就是要重點抓好窯尾預熱器係統和窯頭熟料燒成兩大環節,前後兼顧、協調運轉;所謂“保重點”,就是要重點保證係統喂煤、喂料設備的安全正常運行,為熟料燒成的“動平衡”創造條件;所謂“求穩定”,就是在參數調節過程中,適時適量,小調漸調,以及時的調整克服大的波動,維持熱工製度的基本穩定。所謂“創全優”,就是要通過一段時間的操作,認真總結,結合現場熱工標定等測試工作,總結出適合本廠實際的係統操作參數,即優化參數,使窯的操作較大化,取得突出、高產、低耗、長期安全穩定文明生產的優良成績。
In the specific operation of the central control room, the 12 word formula of "grasping both ends, ensuring key points, seeking stability, and creating all-round excellence" was adhered to. The so-called "two ends" is to focus on the two major links of kiln tail preheater system and kiln head clinker burning, taking into account before and after, and coordinated operation; the so-called "key point" is to ensure the safe and normal operation of coal feeding and feeding equipment of the system, and create conditions for the "dynamic balance" of clinker combustion; the so-called "stability" means that in the process of parameter adjustment, the proper amount of coal can be timely and appropriately, Small and gradual adjustment, timely adjustment to overcome large fluctuations, to maintain the basic stability of the thermal system. The so-called "all-round optimization" is to sum up the system operation parameters suitable for the actual plant through a period of operation, careful summary, combined with field thermal calibration and other testing work, namely, optimization parameters, so as to make the kiln operation larger and achieve outstanding, high-yield, low consumption, long-term safe, stable and civilized production.
以上是關於浙大中控電源中控室的一般操作原則,相信大家都有所了解了,如想了解更多內容歡迎點擊丝瓜视频链接安卓下载的http://www.qistar-garment.net網站。
The above is about the general operating principles of central control room of Zhejiang University. I believe you all know something about it. If you want to know more, please click our http://www.qistar-garment.net Website.
產品推薦
新聞推薦