新聞資訊
網站首頁 > 新聞資訊 >

中控室日常管理應注意些什麽?

2020-09-28 11:41:01 來源:http://www.qistar-garment.net/ 53

  中控室日常管理應注意些什麽?
  What should be paid attention to in the daily management of central control room?
  A:控製室的日常管理對係統穩定運行和維護很重要,日常管理應注意:
  A: The daily management of the control room is very important for the stable operation and maintenance of the system
  1)、控製室門窗位置布置合理,操作站、控製櫃、UPS放置規範,標識清楚。
  1) The locations of doors and windows in the control room is reasonable, the operation station, control cabinet and ups are placed in a standard manner with clear marks.
  2)、控製室保持日常清潔,維持適當的溫度和濕度,檢查照明、空調運行情況。
  2) The control room shall be kept daily clean, proper temperature and humidity shall be maintained, and the operation of lighting and air conditioning shall be checked.
  3)、檢查係統防水、防塵、防腐蝕和防振情況,日常發現有漏洞的地方及時整改。
  3) Check the waterproof, dust-proof, corrosion-proof and vibration proof conditions of the system, and rectify the loopholes in time.
  4)、規範管理,不允許無關人員觸碰控製櫃卡件,對操作站設置密碼,加強保密安全管理。
  4) Standardize the management, do not allow irrelevant personnel to touch the control cabinet card, set password for the operation station, and strengthen the security management.
  5)、對控製櫃內開關、端子、外配等部件標識檢查,使之標識清晰方便維護。
  5) Check the marks of switches, terminals and external parts in the control cabinet to make them clear and convenient for maintenance.
  建議:控製室溫度範圍0-50攝氏度,20度左右適宜;濕度範圍:10%-90%RH,無凝露。
  Suggestion: the temperature range of control room is 0-50 ℃, about 20 ℃; humidity range: 10% - 90% RH, no condensation.
             浙大中控dcs卡件XP313
  DCS係統在日常維護時如何能了解到係統當前故障情況?
  How can DCS know the current fault situation of the system in daily maintenance?
  A:日常維護時注意觀察很重要,重點觀察了解的地方為:
  A: It is very important to pay attention to observation during daily maintenance. The key points of observation and understanding are as follows:
  1、控製站卡件指示等顯示是否異常(fail燈是否亮紅燈),
  1. Whether the card indication of control station is abnormal (whether the fail light is on red light),
  2、進入監控“故障診斷”畫麵查看是否有卡件運行故障提示、通訊網絡異常提示,
  2. Enter the monitoring "fault diagnosis" screen to check whether there is any fault prompt of card operation and abnormal prompt of communication network,
  3、檢查係統供電是否正常。
  3. Check whether the power supply of the system is normal.
  4、檢查控製站電源風扇是否運行,交換機指示燈是否正常,是否有腐蝕現象(接線頭或機櫃銅條處是否發黑等現象)。
  4. Check whether the power supply fan of the control station is running, whether the switch indicator is normal, and whether there is corrosion (whether the connector or cabinet copper strip is blackened, etc.).
  以上是關於中控室日常管理應注意事項和DCS係統日常維護的內容介紹,希望對大家有所幫助,如想了解更多內容歡迎點擊丝瓜视频免费草莓视频免费下载的網站。本司是浙大中控dcs卡件XP313浙大中控dcs卡件XP314的供應商,型號齊全,歡迎您來選購。
  The above is about the central control room daily management should pay attention to the content of daily maintenance and DCS system introduction, hope to help you, if you want to know more content, welcome to click our website. Our company is the supplier of Zhejiang University central control DCS card xp313 and Zhejiang University central control DCS card xp314. You are welcome to purchase.
產品推薦
新聞推薦